Another cutting-edge D1 variant, the D1-TS for Thin Steel features an innovative magnet design that allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all.
D1 Thin Steel MAGNETIC DRILL FEATURES:
1-7/16” (36 mm) diameter x 2" (51 mm) depth of cut
Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds
Adjustable cutter guard with built-in chip breaker
Through spindle coolant system with removable reservoir
Maintenance free rail guide system for long life, minimal run-out and extreme accuracy
Newly designed magent coil for holding on thin material (1/8")
The Overhead Support is highly recommended for the HP110 punch head. This incredible tool allows the operator to move the punch head with little or no effort. Additionally, it allows easy manipulation of the punch and power pack as a single unit. The overhead support is designed for single-operator use and therefore increases productivity by saving manpower and time. Part Number-SM-ZUR-0517-15-00-00-0 The Free Standing Base is fantastic for small production runs and includes foot pedal controls for ease of operator use and bench operation. The base allows the transformation of the HP110/HP60 to a table top unit. Part Number SM-ZST-0507-91-00-00-0 The Wheeled Carriage for punch has 6 points of contact that permit smooth and efficient lineal movement along the workpiece. This great addition to our Hydraulic Punch lineup is designed for single operators and makes one hand operation a breeze. Part Number-SM-PRW-0507-90-00-00-0
Steelmax offers a full line of the highest quality hydraulic punches and dies for use with its best-in-class HP60 and HP110 double action portable hydraulic punching systems. Round punches and dies for flat plate, as well as angled dies for punching round holes in beam flanges, are available as stock items for both punching systems. Selected slot sizes are also stock items. Special shapes and additional slot sizes are available by special order with very short lead times.
The D1 Auto from Steelmax is an advanced semi-automatic drilling machine that is the ideal solution for efficiently drilling large numbers of holes in plates, girders, and other steel fabrication applications. With a maximum 1-3/8” diameter and 2” depth of cut, the D1 Auto covers a wide range of drilling needs in a compact, lightweight machine FEATURES
1-3/8" (36 mm) diameter x 2" (51 mm) depth of cut
Compact, rigid design that weighs just 30 lbs. (13.5 kg)
Optimal combination of spindle speeds and torque produces industry leading cycle times with TCT and HSS cutters
Safe magnet control systems for excellent performance and operator safety
Dual rail guide system provides extraordinary stiffness and maintenance free operation
High efficiency magnetic base provides superior holding power on plate as thin as 1/4” (6mm)
Integrated cutter guard and large coolant tank capacity
BATTERY OPERATED, COMPACT, MAGNETIC DRILL The Steelmax D1 CDL is a battery powered, compact magnetic drilling machine designed to drill holes with a diameter of 1-7/16” (36 mm) using annular cutters. The D1 CDL is also capable of drilling holes with a diameter of 0.47” (12 mm) with a twist drill bit and has a 2” (50 mm) maximum depth of cut. This magnetic drill has a maintenance free guide rail system that minimizes run-out, maintains accuracy, and reduces cutter breakage. This innovative magnetic drill additionally features an LED monitoring system that produces signals in green and red to communicate the current condition of the drill and give safety information to the operator. Ships with 1 (one) charger and 2 (two) 5.5 amh batteries.
The D200XT drilling machine is suitable for hole cutting and tapping applications. Powerful 1600 W variable speed motor enables annular cutting capacity up to 2” (50mm) and drilling capacity up to 7/8”(23mm). Forward & reverse functions allow tapping up to 3/4" with Steelmax’s new tapping chuck and collet system. Two speed gearbox with continuous speed adjustment allows setting the optimal speed depending on diameter, steel grade or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. FEATURES • 1600 W powerful motor with heavy-duty 2-speed gearbox • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes • Suitable for use with TCT or HSS cutters • Electronic clutch and speed control • Overload & Overheat protection • Rigid design extends tool life • Tilt sensor stops motor in case of machine break away • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
Please contact us for tapping accessories available with this drill.
ANNULAR CUTTER DRILLING MACHINE The D250X magnetic drill has a powerful 1600w motor which enables a cutting capacity up to 2-3/8" and a depth of cut up to 3". Newly designed motor housing and magnet make this large capacity drill lighter than other competitive drills in the market. The maintenance free guide rail system helps reduce cutter breakage and gives optimal cutter life. Optimized drilling speeds for both HSS and TCT annular cutters. FEATURES • 1600 W powerful motor with heavy duty 2-speed gearbox • Maintenance free rail guide system using dual guide bars • Suitable for use with TCT or HSS cutters • Rigid design extends tool life • Drilling with twist drills featuring Weldon shank • Innovative smart magnet with weight reduction • Swarf shield/Cutter guard • Coolant bottle assembly
VARIABLE SPEED MAGNETIC DRILLING & TAPPING MACHINE The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4" (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1"( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • 1600 W motor • Overload & Overheat protection • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE with Swivel Base The D400XTS magnetic drilling machine is suitable for numerous industrial hole making and tapping applications. The D400XTS has a swivel base which makes it much easier to align the pilot pin or twist drill for accurate drilling to avoid off-center holes, especially when used upside down or sideways. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4-3/4" (120 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse functions allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Innovative swivel base enables local movement of machine for precise hole positioning • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE The D400XT magnetic drilling machine is suitable for many industrial hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4" (100 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse function allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
POWERFUL HEAVY DUTY MAGNETIC DRILLING MACHINE The D500XT magnetic drill is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 6" (152 mm) and drilling capacity up to 1-5/8" (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8" (M42) by using the quick change tapping system by Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Very powerful 2300 W motor • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
The D1 AIR ATEX is an extremely small portable pneumatic drilling machine for cutting holes up to 1-3/8" (36 mm) diameter in hazardous environments and where access to the hole location is restricted. The D1 AIR ATEX conforms to the ATEX II 2 G/D c IIC T6/T4 standard for equipment used in hazardous environments. A combination of pneumatic drive and permanent magnetic base eliminate the need of an electric power supply, thus making this machine an ideal solution in many hazardous environments such as offshore oil platforms, mining applications, shipbuilding and petrochemical industries. The D1 AIR ATEX is one of the lowest height magnetic drills currently available on the world market. FEATURES
1-3/8" (35 mm) diameter x 1" (25 mm) depth of cut with annular cutters
5/8" (16 mm) diameter with solid twist drill bits
For use in hazardous environments - fully ATEX compliant
Low profile for use in height-restricted spaces
Pneumatic drive and permanent magnetic base
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
The Overhead Support is highly recommended for the HP110 punch head. This incredible tool allows the operator to move the punch head with little or no effort. Additionally, it allows easy manipulation of the punch and power pack as a single unit. The overhead support is designed for single-operator use and therefore increases productivity by saving manpower and time. Part Number-SM-ZUR-0517-15-00-00-0 
The Free Standing Base is fantastic for small production runs and includes foot pedal controls for ease of operator use and bench operation. The base allows the transformation of the HP110/HP60 to a table top unit. Part Number SM-ZST-0507-91-00-00-0 
The Wheeled Carriage for punch has 6 points of contact that permit smooth and efficient lineal movement along the workpiece. This great addition to our Hydraulic Punch lineup is designed for single operators and makes one hand operation a breeze. Part Number-SM-PRW-0507-90-00-00-0 
