D1 Special Application Drills

The D1-SM swivel base magnetic drill has all the features that make the D1 the go to drill for fabricators with the added ability to easily drill holes on convex (min. diameter 12”) and concave surfaces (min diameter 40”). Four individual swivel magnets adjust to the surface, allowing the machine to work on uneven work areas. Each magnet is equipped with variable holding force features allowing easy machine positioning while the magnets are partially engaged. The magnets work without electricity making a great safety solution for your drilling needs

Drill out of position without the worry of power loss with the D1-PM with Permanent Magnet. The D1-PM’s neodymium rare earth magnets clamp to ferrous surfaces without the need for external electric power offering a safety solution few mag drills on the market can match. The switchable permanent magnet allows for partial engagement making placement over the hole location easy and precise

Another cutting-edge  D1 variant, the D1-TS for Thin Steel features an innovative magnet design which allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all

D1 Special Application MAGNETIC DRILL FEATURES:

  • 1-3/8″ (36 mm) diameter x 2″ (51 mm) depth of cut
  • Ultra compact and light weight: 14-3/4″ working height (with coolant bottle) and only 22 pounds
  • Adjustable cutter guard with built-in chip breaker
  • Through spindle coolant system with removable reservoir
  • Maintenance free rail guide system for long life, minimal run-out and extreme accuracy
  • Safe Magnet™ circuitry recognizes magnetic holding power
  • Automatic slug ejection system
  • Magnet is 1/3 smaller, lighter and stronger than competing models
  • Magnet uses only 50% power when motor is not under load
  • Designed for easy field service and repair
  • All aluminum parts are heat treated for rigidity

Description

  • 1-3/8″ (36 mm) diameter x 2″ (51 mm) depth of cut
  • Ultra compact and light weight: 14-3/4″ working height (with coolant bottle) and 24-31 pounds
  • Adjustable cutter guard with built-in chip breaker
  • Through spindle coolant system with removable reservoir
  • Overload protection
  • Drop files here or

    You may also like…