Steelmax offers a full line of the highest quality hydraulic  punches and dies for use with its best-in-class HP60 and HP110 double action portable hydraulic punching systems.  Round punches and dies for flat plate, as well as angled dies for punching round holes in beam flanges, are available as stock items for both punching systems.  Selected slot sizes are also stock items.  Special shapes and additional slot sizes are available by special order with very short lead times.
Description
- Steelmax offers a full line of the highest quality hydraulic punches and dies for use with its best-in-class HP60 and HP110 double action portable hydraulic punching systems
- Round punches and dies for flat plate, as well as angled dies for punching round holes in beam flanges, are available as stock items for both punching systems
- Selected slot sizes are also stock items
- Special shapes and additional slot sizes are available by special order with very short lead times
D1 Compact Portable Magnetic Drill Technical Specifications
| Motor Speeds (Under Load): | 350 rpm |
| Motor Power | 920 W 1.2 HP |
| Voltage | 115V/60Hz or 230V/50Hz |
| Max Hole Size-Annular Cutter | 1-7/16 " (36 mm) |
| Max/Twist Drilling Capacity | 1/2" (12 mm) |
| Max Depth of Cut | 2" (51 mm) |
| Stroke | 2-3/4" (70 mm) |
| Magnetic clamping force (surface with the thickness of 1" (25 mm) and roughness Ra=1.25 | 2,021.64 (lbf) 917 kgf (9000 N) |
| Magnet base dimensions | 3-1/8 x 6-5/16 x 1-7/16 [“] 80 × 161 × 36.5(mm) |
| Min. Workplace Thickness | 1/4" (6 mm) |
| Spindle | 3/4" (19 mm) Weldon |
| Tool Holder | 3/4" (19 mm) Weldon |
| Weight | 22 lbs (10 kg) |
Application Use Cases
The S14-M suits mechanical fabrication, transportation, and construction work where angled cuts matter as much as a clean edge. It handles pipe, plate, channel, conduit, angle iron, metal studs, rebar, and tubing, making it useful for structural steel fabrication, custom metal frames, and repeatable angle cuts on production runs. Its 1750W motor and portable 72 lb frame support both jobsite work and continuous shop use.
Frequently Asked Questions
What's the difference between the S14 and S14-M?
The S14-M offers a wider +/-46° mitering range compared to the S14's 45°, plus a heavier cast-aluminum base for added stability. Both share the same 1750W motor, 14" blade, and pipe capacity, with the S14-M priced for its extra versatility.
Is 230V available, or only 120V?
The S14-M comes in both 120V/60Hz (SM-S-14-M) and 230V/50Hz (SM-S-14-M-230) versions, so it runs on standard shop power or 230V circuits depending on your facility's setup.
What blade comes included, and can it be swapped?
A newly designed 14" laser-cut TCT blade for mild steel is included. The 1" arbor bore accepts other compatible 14" blades, so operators can swap in one suited to aluminum, stainless, or thinner materials.
What's the mitering range and how is it adjusted?
The S14-M miters up to +/-46°, letting operators dial in custom angles for fabrication layouts. The precision miter table locks at the set angle, delivering repeatable, accurate cuts across a production run.
Is it suitable for field/job site use or shop-only?
At 72 lbs, the S14-M is portable enough for jobsite use while still built for shop duty. Steelmax positions it for both field and shop environments, making it a flexible pick either way.
