Industrial Mag Drills

D1 Compact Portable Magnetic Drill

PRICE $855.00
The D1 is an ultra-compact magnetic drilli with maximum capacity of 1-7/16" (36 mm) diameter in 2" (51 mm) thick material. The unit's ultra light weight of 22 lbs (10 kg) is the lowest in its class. The maintenance-free rail guide system minimizes run-out, maintains accuracy and reduces cutter breakage. The D1 is equipped with an electromagnetic Energy Saving Base (ESB) which uses only 50% of the power when the motor is not under load, dramatically increasing the operating life of the electromagnet, and a Magnetic Field Shape Control (MFSC) system which provides maximum holding power on thin material. Safe Magnet™ circuitry assures adequate adhesive force for safe operation.
D1 COMPACT PORTABLE MAGNETIC DRILL FEATURES:

1-7/16" (36 mm) diameter x 2" (51 mm) depth of cut

Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds

Adjustable cutter guard with built-in chip breaker

Through spindle coolant system with removable reservoir

Maintenance free rail guide system for long life, minimal run-out and extreme accuracy

Safe Magnet™ circuitry recognizes magnetic holding power

Automatic slug ejection system

Magnet is 1/3 smaller, lighter and stronger than competing models

Magnet uses only 50% power when motor is not under load

Designed for easy field service and repair

All aluminum parts are heat treated for rigidity
Add to cart Details
D1 Low Profile Mag Drill

PRICE $1,315.00
The D1 Low Profile is an ultra-low profile mag drill, that fits in the tightest of work spaces. It is a perfect solution for any applications in confined spaces, where typical mag drills are too large. A powerful motor and strong, electromagnetic base enable drilling of holes up to 1-7/16" (36 mm) diameter to a depth of up to 1-3/16" (30 mm). The D1 Low Profile Mag Drill accepts both TCT and HSS cutters as well as twist drill bits with a standard 3/4” Weldon shank. FEATURES

Ultra low profile mag drill - only 7" tall - with electromagnetic base

Extremely low weight - only 21 lbs (9.5 kg)

1-7/16" (36 mm) diameter x 1-3/16" (30 mm) depth of cut with annular cutters

Accepts Weldon Shank twist drill bits up to 1/2" diameter

Over 1-1/2" stroke (39 mm)

Integrated swarf guard

Convenient lifting handle for easy transportation
Add to cart Details
D1 Thin Steel Magnetic Drill

PRICE $1,205.00
Another cutting-edge D1 variant, the D1-TS for Thin Steel features an innovative magnet design that allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all.
D1 Thin Steel MAGNETIC DRILL FEATURES:

1-7/16” (36 mm) diameter x 2" (51 mm) depth of cut

Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds

Adjustable cutter guard with built-in chip breaker

Through spindle coolant system with removable reservoir

Maintenance free rail guide system for long life, minimal run-out and extreme accuracy

Newly designed magent coil for holding on thin material (1/8")

Automatic slug ejection system

Designed for easy field service and repair

All aluminum parts are heat treated for rigidity
Add to cart Details
D250X Magnetic Drilling Machine

PRICE $1,765.00

ANNULAR CUTTER DRILLING MACHINE The D250X magnetic drill has a powerful 1600w motor which enables a cutting capacity up to 2-3/8" and a depth of cut up to 3". Newly designed motor housing and magnet make this large capacity drill lighter than other competitive drills in the market. The maintenance free guide rail system helps reduce cutter breakage and gives optimal cutter life. Optimized drilling speeds for both HSS and TCT annular cutters. FEATURES • 1600 W powerful motor with heavy duty 2-speed gearbox • Maintenance free rail guide system using dual guide bars • Suitable for use with TCT or HSS cutters • Rigid design extends tool life • Drilling with twist drills featuring Weldon shank • Innovative smart magnet with weight reduction • Swarf shield/Cutter guard • Coolant bottle assembly

Add to cart Details
D1 Auto Feed Mag Drill

PRICE $1,910.00
The D1 Auto from Steelmax is an advanced semi-automatic drilling machine that is the ideal solution for efficiently drilling large numbers of holes in plates, girders, and other steel fabrication applications. With a maximum 1-3/8” diameter and 2” depth of cut, the D1 Auto covers a wide range of drilling needs in a compact, lightweight machine FEATURES

1-3/8" (36 mm) diameter x 2" (51 mm) depth of cut

Compact, rigid design that weighs just 30 lbs. (13.5 kg)

Optimal combination of spindle speeds and torque produces industry leading cycle times with TCT and HSS cutters

Safe magnet control systems for excellent performance and operator safety

Dual rail guide system provides extraordinary stiffness and maintenance free operation

High efficiency magnetic base provides superior holding power on plate as thin as 1/4” (6mm)

Integrated cutter guard and large coolant tank capacity
Add to cart Details
Out of stock

D400XT Industrial Tapping & Magnetic Drilling Machine

PRICE $3,445.00

Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE The D400XT magnetic drilling machine is suitable for many industrial hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4" (100 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse function allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.

Details
D1 PRO X Portable Mag Drill

PRICE $1,245.00
The Steelmax D1 PRO X is an extremely durable, rigorously constructed magnetic drilling machine that is purposely designed for longevity. The 440 RPM motor (under load) makes it optimal to use with HSS and TCT annular cutters. Lightweight, compact and portable, this magnetic drill features a powerful 1100-watt motor capable of drilling with annular cutters up to 1-9/16" (40 mm) diameter holes through 2" (50 mm) thick material. The optional drill chuck can be used with solid, twist drills up to 5/8" (16 mm) diameter and the large stroke enables easy use of longer cutters. Drill body is updated with increased stiffness along with gearbox housing and ribs. The D1 PRO X is equipped with the most advanced electromagnetic technology. Using only 50% power when the motor is not under load, the Energy Saving Base (ESB) reduces excessive heat build-up and dramatically increases the operating life of the electromagnet. Our Magnetic Field Shape Control (MFSC) system provides maximum holding power on thin materials. The integrated Magnetic Power Adhesion Control Module (MPAC) detects the adhesive force of the electromagnetic base and prevents drill activation when there is insufficient adhesive power, protecting both the machine and the operator. FEATURES

Up to 1-9/16" diameter and 2” depth of cut

6" stroke

Magnetic Power Adhesion Control (MPAC)

Magnetic Field Shape Control (MFSC)

Energy Saving Base (ESB)

Comes with swarf shield and coolant bottle assembly

Unrivaled cutting capacity weight class
Add to cart Details
D500XT Heavy Duty Tapping & Drilling Machine

PRICE $4,855.00

POWERFUL HEAVY DUTY MAGNETIC DRILLING MACHINE The D500XT magnetic drill is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 6" (152 mm) and drilling capacity up to 1-5/8" (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8" (M42) by using the quick change tapping system by Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Very powerful 2300 W motor • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.

Add to cart Details
Bridge & Hex Bridge Reamers

PRICE $38.75 – $183.68

Bridge Reamers
Designed as a convenient and economical solution to align and enlarge existing holes in steel, ready for bolting. Reamers are used to align existing holes prior to bolt or rivet installation. The point is tapered to permit entry into overlapping holes, which is common in many manufacturing applications. Ideal for use in both a Portable Magnetic Drilling Machine, and an Impact Wrench with additional adapter.
Hex Bridge Reamers
Designed for when the bolt does not fit the hole. Designed with a hexagon head, ready to fit hex socket for use with an impact wrench. Steelmax bridge reamers open up or align existing holes in steel when the bolt does not fit. See the sizes we offer below:

Select options Details
D400 XTS Industrial Magnetic Drilling Machine with Swivel Base

PRICE $4,095.00

Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE with Swivel Base The D400XTS magnetic drilling machine is suitable for numerous industrial hole making and tapping applications. The D400XTS has a swivel base which makes it much easier to align the pilot pin or twist drill for accurate drilling to avoid off-center holes, especially when used upside down or sideways. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4-3/4" (120 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse functions allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Innovative swivel base enables local movement of machine for precise hole positioning • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.

Add to cart Details
D300XT Tapping & Drilling Machine

PRICE $2,910.00

VARIABLE SPEED MAGNETIC DRILLING & TAPPING MACHINE The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4" (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1"( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • 1600 W motor • Overload & Overheat protection • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.

Add to cart Details
D1 CDL Cordless Magnetic Drilling Machine

PRICE $2,310.00

BATTERY OPERATED, COMPACT, MAGNETIC DRILL The Steelmax D1 CDL is a battery powered, compact magnetic drilling machine designed to drill holes with a diameter of 1-7/16” (36 mm) using annular cutters. The D1 CDL is also capable of drilling holes with a diameter of 0.47” (12 mm) with a twist drill bit and has a 2” (50 mm) maximum depth of cut. This magnetic drill has a maintenance free guide rail system that minimizes run-out, maintains accuracy, and reduces cutter breakage. This innovative magnetic drill additionally features an LED monitoring system that produces signals in green and red to communicate the current condition of the drill and give safety information to the operator. Ships with 1 (one) charger and 2 (two) 5.5 amh batteries.

Add to cart Details
Collets, Chucks & Tapping Accessories

PRICE
QUICK CHANGE TAPPING SYSTEM Our XT magnetic drill line utilizes our proprietary tapping chuck and collet system transforming the magnetic drills into industry-leading tapping machines. With capacities from ¼” up to 1-5/8”, giving the XT line the highest capacity of tapping on the market. Blind hole and through hole quick-change tapping collets are available

Quick change tapping system-compatible with XT version drills

Customized tapping heads

Ability to tap pre-drilled or blind holes

Suitable for use with either quick-change clutched or positive driven type collet

Quick fitting collar to securely hold the required tap

** Size specific**
Details
D200XT Universal Tapping & Drilling Machine

PRICE $2,620.00

The D200XT drilling machine is suitable for hole cutting and tapping applications. Powerful 1600 W variable speed motor enables annular cutting capacity up to 2” (50mm) and drilling capacity up to 7/8”(23mm). Forward & reverse functions allow tapping up to 3/4" with Steelmax’s new tapping chuck and collet system. Two speed gearbox with continuous speed adjustment allows setting the optimal speed depending on diameter, steel grade or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. FEATURES • 1600 W powerful motor with heavy-duty 2-speed gearbox • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes • Suitable for use with TCT or HSS cutters • Electronic clutch and speed control • Overload & Overheat protection • Rigid design extends tool life • Tilt sensor stops motor in case of machine break away • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
Please contact us for tapping accessories available with this drill.

Add to cart Details
D1 Special Application Drills

PRICE $1,205.00 – $2,160.00
The D1-SM swivel magnet drill has all the features that make the D1 the go to drill for fabricators with the added ability to easily drill holes on convex (min. diameter 12”) and concave surfaces (min diameter 40”). Four individual swivel magnets adjust to the surface, allowing the machine to work on uneven work areas. Each magnet is equipped with variable holding force features allowing easy machine positioning while the magnets are partially engaged. The magnets work without electricity making a great safety solution for your drilling needs Drill out of position without the worry of power loss with the D1-PM with Permanent Magnet. The D1-PM’s neodymium rare earth magnets clamp to ferrous surfaces without the need for external electric power offering a safety solution few mag drills on the market can match. The switchable permanent magnet allows for partial engagement making placement over the hole location easy and precise Another cutting-edge D1 variant, the D1-TS for Thin Steel features an innovative magnet design which allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all
D1 Special Application MAGNETIC DRILL FEATURES:

1-7/16” (36 mm) diameter x 2" (51 mm) depth of cut

Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds

Adjustable cutter guard with built-in chip breaker

Through spindle coolant system with removable reservoir

Maintenance free rail guide system for long life, minimal run-out and extreme accuracy

Automatic slug ejection system

Designed for easy field service and repair

All aluminum parts are heat treated for rigidity
Details