Drilling & Punching | Steelmax

Punch Accessories

PRICE

The Overhead Support is highly recommended for the HP110 punch head. This incredible tool allows the operator to move the punch head with little or no effort. Additionally, it allows easy manipulation of the punch and power pack as a single unit. The overhead support is designed for single-operator use and therefore increases productivity by saving manpower and time. Part Number-SM-ZUR-0517-15-00-00-0 The Free Standing Base is fantastic for small production runs and includes foot pedal controls for ease of operator use and bench operation. The base allows the transformation of the HP110/HP60 to a table top unit. Part Number SM-ZST-0507-91-00-00-0 The Wheeled Carriage for punch has 6 points of contact that permit smooth and efficient lineal movement along the workpiece. This great addition to our Hydraulic Punch lineup is designed for single operators and makes one hand operation a breeze. Part Number-SM-PRW-0507-90-00-00-0

Details
D300XT Tapping & Drilling Machine

PRICE $2,910.00

VARIABLE SPEED MAGNETIC DRILLING & TAPPING MACHINE The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4" (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1"( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • 1600 W motor • Overload & Overheat protection • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.

Add to cart Details
D500XT Heavy Duty Tapping & Drilling Machine

PRICE $4,855.00

POWERFUL HEAVY DUTY MAGNETIC DRILLING MACHINE The D500XT magnetic drill is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 6" (152 mm) and drilling capacity up to 1-5/8" (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8" (M42) by using the quick change tapping system by Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Very powerful 2300 W motor • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.

Add to cart Details
Out of stock

D400XT Industrial Tapping & Magnetic Drilling Machine

PRICE $3,445.00

Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE The D400XT magnetic drilling machine is suitable for many industrial hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4" (100 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse function allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.

Details
D250X Magnetic Drilling Machine

PRICE $1,765.00

ANNULAR CUTTER DRILLING MACHINE The D250X magnetic drill has a powerful 1600w motor which enables a cutting capacity up to 2-3/8" and a depth of cut up to 3". Newly designed motor housing and magnet make this large capacity drill lighter than other competitive drills in the market. The maintenance free guide rail system helps reduce cutter breakage and gives optimal cutter life. Optimized drilling speeds for both HSS and TCT annular cutters. FEATURES • 1600 W powerful motor with heavy duty 2-speed gearbox • Maintenance free rail guide system using dual guide bars • Suitable for use with TCT or HSS cutters • Rigid design extends tool life • Drilling with twist drills featuring Weldon shank • Innovative smart magnet with weight reduction • Swarf shield/Cutter guard • Coolant bottle assembly

Add to cart Details
D200XT Universal Tapping & Drilling Machine

PRICE $2,620.00

The D200XT drilling machine is suitable for hole cutting and tapping applications. Powerful 1600 W variable speed motor enables annular cutting capacity up to 2” (50mm) and drilling capacity up to 7/8”(23mm). Forward & reverse functions allow tapping up to 3/4" with Steelmax’s new tapping chuck and collet system. Two speed gearbox with continuous speed adjustment allows setting the optimal speed depending on diameter, steel grade or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. FEATURES • 1600 W powerful motor with heavy-duty 2-speed gearbox • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes • Suitable for use with TCT or HSS cutters • Electronic clutch and speed control • Overload & Overheat protection • Rigid design extends tool life • Tilt sensor stops motor in case of machine break away • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
Please contact us for tapping accessories available with this drill.

Add to cart Details
D1 Special Application Drills

PRICE $1,205.00 – $2,160.00
The D1-SM swivel magnet drill has all the features that make the D1 the go to drill for fabricators with the added ability to easily drill holes on convex (min. diameter 12”) and concave surfaces (min diameter 40”). Four individual swivel magnets adjust to the surface, allowing the machine to work on uneven work areas. Each magnet is equipped with variable holding force features allowing easy machine positioning while the magnets are partially engaged. The magnets work without electricity making a great safety solution for your drilling needs Drill out of position without the worry of power loss with the D1-PM with Permanent Magnet. The D1-PM’s neodymium rare earth magnets clamp to ferrous surfaces without the need for external electric power offering a safety solution few mag drills on the market can match. The switchable permanent magnet allows for partial engagement making placement over the hole location easy and precise Another cutting-edge D1 variant, the D1-TS for Thin Steel features an innovative magnet design which allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all
D1 Special Application MAGNETIC DRILL FEATURES:

1-7/16” (36 mm) diameter x 2" (51 mm) depth of cut

Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds

Adjustable cutter guard with built-in chip breaker

Through spindle coolant system with removable reservoir

Maintenance free rail guide system for long life, minimal run-out and extreme accuracy

Automatic slug ejection system

Designed for easy field service and repair

All aluminum parts are heat treated for rigidity
Details
Magnetic Drill Pipe Attachment Systems

PRICE

EASILY MOUNT MAG DRILLS TO PIPES FOR SAFE OPERATION Enhance your drilling efficiency with Steelmax high-quality magnetic drill pipe adapters. Our magnetic drill pipe attachments are designed for mounting Steelmax drills on pipes, tubes, tanks, oval work pieces and other parts which can be gripped with mounting chains. Designed to seamlessly connect various drill pipes, these adapters ensure a secure and reliable coupling for your drilling operations. Our innovative design features pivoting feet and tensioning chains which add versatility and make adjusting for various diameters a simple process. Whether you're working in construction, manufacturing, or any other industry requiring precision drilling, our magnetic drill pipe adapters offer exceptional holding power and durability. Experience improved productivity as these adapters facilitate quick and hassle-free pipe changes, minimizing downtime and maximizing your project's progress. Explore our range of magnetic drill pipe adapters (attachments) to revolutionize your drilling experience and achieve superior results.

Details
Mag Drill Vacuum Base for Non-Ferrous Applications

PRICE

Our unique mag drill vacuum base system easily enables use of a standard magnetic drills on non-ferrous materials such as aluminum and stainless steel.

Details
Steelmax High Performance Cutting Fluid

PRICE $13.00 – $36.00
Steelmax® High Performance Cutting Fluid is a fully-synthetic, nitrite-free, water soluble cutting fluid engineered for use with both HSS and TCT annular cutters to improve cutting performance and extend cutter life. It can also be used for other grinding and cutting operations on grey iron castings, carbon steel, stainless steel, titanium and copper, brass and nickel alloys. Steelmax® High Performance Cutting Fluid concentrate is available in quart and gallon sizes with a recommended mix ratio of 8 parts water to 1 part concentrate.

100% biodegradable, water soluble concentrate

Produces outstanding tool life and cut finish

Superior cooling properties

No unpleasant odors; non-toxic and non-carcinogenic

Non-corrosive with excellent rust protection

Low foaming; easy clean-up
Select options Details
Steelmax TCT Annular Cutters

PRICE $79.20 – $495.30

Steelmax TCT annular cutters are made with the highest quality carbide available and are extremely well suited to work on harder materials and higher speed applications. TCT cutters are most cost effective for larger holes (over 1-1/2" in diameter) and in thicker materials (2" and over). All Steelmax annular cutters ship with a pilot pin installed at no extra charge.* Steelmax High-Performance Cutting Fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. Our High-Performance Cutting Fluid is a water-based cutting fluid that is bio-degradable and does not require time-consuming cleanup prior to welding or assembling parts.
*6" TCT Cutters do not ship with pilot pin. Click here to purchase a one-or two-piece pilot pin with your 6" annular cutter order.

Select options Details
D1 Low Profile Mag Drill

PRICE $1,315.00
The D1 Low Profile is an ultra-low profile mag drill, that fits in the tightest of work spaces. It is a perfect solution for any applications in confined spaces, where typical mag drills are too large. A powerful motor and strong, electromagnetic base enable drilling of holes up to 1-7/16" (36 mm) diameter to a depth of up to 1-3/16" (30 mm). The D1 Low Profile Mag Drill accepts both TCT and HSS cutters as well as twist drill bits with a standard 3/4” Weldon shank. FEATURES

Ultra low profile mag drill - only 7" tall - with electromagnetic base

Extremely low weight - only 21 lbs (9.5 kg)

1-7/16" (36 mm) diameter x 1-3/16" (30 mm) depth of cut with annular cutters

Accepts Weldon Shank twist drill bits up to 1/2" diameter

Over 1-1/2" stroke (39 mm)

Integrated swarf guard

Convenient lifting handle for easy transportation
Add to cart Details

D1 Special Application MAGNETIC DRILL FEATURES: