- Powerful 7,500 Watt electric motor for continuous operation
- Variable auto-feed to bevel both ferrous and non-ferrous materials
- Continuously adjustable bevel angle from 15 to 60 degrees
- Simple depth of cut adjustment
- High-speed rotary milling head with 10 replaceable carbide inserts produces a clean, milled surface free of thermal distortion with no heat affected zone
- Multiple cutting insert designs for optimal performance on different materials
- Versatile table top operation permits hand feeding of small plates, square/rectangular tubing, pipe, angle iron and round stock
- Optional table extensions accommodate longer material
- Produces bevel widths up to 1-3/16” (30 mm)
- Plate thickness up to 4” (100 mm)
The Steelmax SBM500 is a robust and efficient solution for beveling and deburring steel plate, angle, square/rectangular tubing and pipe. The SBM500 features a high-speed rotary milling head with carbide inserts that produces a clean, milled surface without thermal distortion or a heat affected zone. Variable feed rates and precise milling head speed control produce repeatable and accurately milled weld preparations in both ferrous and non-ferrous materials; improving part fit-up resulting in better welds. Accurate weld preparation reduces over welding, defect repair and production time, significantly lowering production costs. With the capacity to produce bevels up to 1-3/16” wide on plate up to 4” thick, the SBM500 is a unique solution for fabricators that need a high throughput beveling solution. FEATURES- Eliminate laborious hand grinding, poor fit-up, weld defects and over welding with this in-line machining tool! Extremely productive when full penetration welding is required, the Steelmax PB5 will produce accurate weld preparation in minutes. Creating highly repeatable and consistent fit-up, this tool dramatically reduces cycle times and improves work flow. By utilizing a self-centering mandrel which mounts internally to the open end of the tube or pipe, the PB5 can be rapidly deployed from one pipe to another. Available with a pneumatic or electric motor, the PB5 can be mounted in pipe or tubing with a minimum inside diameter of 1.25" (32 mm) and can bevel outside diameters up to 4.5" (114 mm). Designed with three tool holders, the PB5 can simultaneously mill the OD Bevel, Root Face and ID counterbore to create consistent wall thickness around the joint and ensure complete weld penetration. Optional Accessories include:
- Extension set to accommodate pipe or tubing up to 5 ½" (140 mm) OD
- Boiler Repair Kit for working on water walls and in restricted spaces.
- Simultaneously bevel, face and ID counterbore pipe or tubing
- Available with pneumatic or electric motor options
- Variety of tool bits available for creating various bevel angles for V and J grove preparation
- Self-Centering ID Mounted Mandrel
- The Steelmax SM-PBM 1000 is designed for beveling and facing pipes, tanks or tubes with diameters ranging from 8" – 40" (200 mm - 1000 mm). It is capable of machining bevel widths up to 1-3/4" (45 mm) within a range of angles from 0° - 60°. An exclusive “J” groove beveling attachment is also available. With its high-speed rotary milling head, PBM 1000 produces accurate bevels in a fraction of the time required by traditional single point machining. This saves time and money and improves accuracy. FEATURES
- Bevel pipe between 8 - 40" diameter
- High-speed rotary milling head with replaceable inserts
- Adjustable bevel angle between 0° - 60°
- J groove beveling option
- 11 ton capacity
- Powerful 230 Volt 3 PH Motor
- The Steelmax PB10 pipe beveling machine is designed for portable use in pipe machining operations and can be used efficiently by a single operator. The PB10 is a heavy-duty ID mounted pipe beveler utilizing self-centering expandable mandrels to provide quick and proper alignment to a pipe or a tube prior to machining operations. The PB10 is able to bevel, face and counter-bore in a single operation, making all these weld prep operations quick and simple. Depending on preferences and site conditions, the PB10 can be operated with a powerful pneumatic motor or a high-torque electric motor. FEATURES
- Bevel, face and counter-bore simultaneously
- Standard and custom made tool bits available
- Available in electric and pneumatic versions
- J-Bevel tool bits available for high welding efficiency on thicker walled pipe
