• Battery powered magnetic drill
    BATTERY OPERATED, COMPACT, MAGNETIC DRILL The Steelmax D1 CDL is a battery powered, compact magnetic drilling machine designed to drill holes with a diameter of 1-7/16” (36 mm) using annular cutters. The D1 CDL is also capable of drilling holes with a diameter of 0.47” (12 mm) with a twist drill bit and has a 2” (50 mm) maximum depth of cut.  This magnetic drill has a maintenance free guide rail system that minimizes run-out, maintains accuracy, and reduces cutter breakage. This innovative magnetic drill additionally features an LED monitoring system that produces signals in green and red to communicate the current condition of the drill and give safety information to the operator. Ships with 1 (one) charger and 2 (two) 5.5 amh batteries.
    Add to cart Details
  • QUICK CHANGE TAPPING SYSTEM Our XT magnetic drill line utilizes our proprietary tapping chuck and collet system transforming the magnetic drills into industry-leading tapping machines.  With capacities from ¼” up to 1-5/8”, giving the XT line the highest capacity of tapping on the market.  Blind hole and through hole quick-change tapping collets are available
    • Quick change tapping system-compatible with XT version drills
    • Customized tapping heads
    • Ability to tap pre-drilled or blind holes
    • Suitable for use with either quick-change clutched or positive driven type collet
    • Quick fitting collar to securely hold the required tap
    ** Size specific**
    Details
  • The D200XT drilling machine is suitable for hole cutting and tapping applications. Powerful 1600 W variable speed motor enables annular cutting capacity up to 2” (50mm) and drilling capacity up to  7/8”(23mm). Forward & reverse functions allow tapping up to 3/4" with Steelmax’s new tapping chuck and collet system. Two speed gearbox with continuous speed adjustment allows setting the optimal speed depending on diameter, steel grade or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. FEATURES • 1600 W powerful motor with heavy-duty 2-speed gearbox • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes • Suitable for use with TCT or HSS cutters • Electronic clutch and speed control • Overload & Overheat protection • Rigid design extends tool life • Tilt sensor stops motor in case of machine break away • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
    Please contact us for tapping accessories available with this drill.
    Add to cart Details
  • D1 Special Application Drills

    PRICE $1,205.00$2,160.00
    The D1-SM swivel magnet drill has all the features that make the D1 the go to drill for fabricators with the added ability to easily drill holes on convex (min. diameter 12”) and concave surfaces (min diameter 40”). Four individual swivel magnets adjust to the surface, allowing the machine to work on uneven work areas. Each magnet is equipped with variable holding force features allowing easy machine positioning while the magnets are partially engaged. The magnets work without electricity making a great safety solution for your drilling needs Drill out of position without the worry of power loss with the D1-PM with Permanent Magnet. The D1-PM’s neodymium rare earth magnets clamp to ferrous surfaces without the need for external electric power offering a safety solution few mag drills on the market can match. The switchable permanent magnet allows for partial engagement making placement over the hole location easy and precise Another cutting-edge  D1 variant, the D1-TS for Thin Steel features an innovative magnet design which allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all

    D1 Special Application MAGNETIC DRILL FEATURES:

    • 1-7/16” (36 mm) diameter x 2" (51 mm) depth of cut
    • Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds
    • Adjustable cutter guard with built-in chip breaker
    • Through spindle coolant system with removable reservoir
    • Maintenance free rail guide system for long life, minimal run-out and extreme accuracy
    • Automatic slug ejection system
    • Designed for easy field service and repair
    • All aluminum parts are heat treated for rigidity
    Details
Go to Top