Drilling & Punching | Steelmax

D1 Thin Steel Magnetic Drill

PRICE $1,205.00

Another cutting-edge D1 variant, the D1-TS for Thin Steel features an innovative magnet design that allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all.

D1 Thin Steel MAGNETIC DRILL FEATURES:

1-7/16” (36 mm) diameter x 2" (51 mm) depth of cut
Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds
Adjustable cutter guard with built-in chip breaker
Through spindle coolant system with removable reservoir
Maintenance free rail guide system for long life, minimal run-out and extreme accuracy
Newly designed magent coil for holding on thin material (1/8")
Automatic slug ejection system
Designed for easy field service and repair
All aluminum parts are heat treated for rigidity

Add to cart Details

D1 Low Profile Mag Drill

PRICE $1,315.00

The D1 Low Profile is an ultra-low profile mag drill, that fits in the tightest of work spaces. It is a perfect solution for any applications in confined spaces, where typical mag drills are too large. A powerful motor and strong, electromagnetic base enable drilling of holes up to 1-7/16" (36 mm) diameter to a depth of up to 1-3/16" (30 mm). The D1 Low Profile Mag Drill accepts both TCT and HSS cutters as well as twist drill bits with a standard 3/4” Weldon shank. FEATURES

Ultra low profile mag drill - only 7" tall - with electromagnetic base
Extremely low weight - only 21 lbs (9.5 kg)
1-7/16" (36 mm) diameter x 1-3/16" (30 mm) depth of cut with annular cutters
Accepts Weldon Shank twist drill bits up to 1/2" diameter
Over 1-1/2" stroke (39 mm)
Integrated swarf guard
Convenient lifting handle for easy transportation

Add to cart Details

Pilot Pins for Extra Long Cutters

PRICE $6.20 – $26.50

Pilot Pins for Annular Cutters are crucial components in the drilling process, particularly in metalworking and heavy-duty applications. They serve as guides and alignment device for the annular cutter or magnetic drill, ensuring the most precise and accurate hole drilling.

Select options Details

Tap Size High Speed (HSS) Annular Cutters

PRICE $37.10 – $164.60

Tap Size Annular Cutters with Pilot Pin Installed Experience precision and efficiency with our comprehensive range of HSS Tap Size Annular Cutters. Engineered for excellence, these cutters are designed to provide clean and accurate holes in a variety of materials, ensuring seamless threading and tapping operations. With a wide selection of sizes and superior cutting performance, our Tap Size Annular Cutters are your go-to solution for achieving impeccable results in metalworking and construction projects. Elevate your productivity and precision with our top-tier tools, engineered to meet the highest industry standards.

Select options Details

Annular Cutter Sets

PRICE $211.80 – $560.90

This Steelmax offering is a 13 piece or 7 piece premium annular cutter set available in 1" & 2" depth of cut. These annular cutter sets give you a complete system to handle the most popular hole-making jobs. Utilizing the carrying case also helps maintain the life of the annular cutters. Steelmax HSS (High Speed Steel) cutters utilize an M2Al (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and a less brittle character compared to other M2 formulations, such as those using a cobalt additive.

Select options Details

D1 Compact Portable Magnetic Drill

PRICE $855.00

The D1 is an ultra-compact magnetic drilli with maximum capacity of 1-7/16" (36 mm) diameter in 2" (51 mm) thick material. The unit's ultra light weight of 22 lbs (10 kg) is the lowest in its class. The maintenance-free rail guide system minimizes run-out, maintains accuracy and reduces cutter breakage. The D1 is equipped with an electromagnetic Energy Saving Base (ESB) which uses only 50% of the power when the motor is not under load, dramatically increasing the operating life of the electromagnet, and a Magnetic Field Shape Control (MFSC) system which provides maximum holding power on thin material. Safe Magnet™ circuitry assures adequate adhesive force for safe operation.

D1 COMPACT PORTABLE MAGNETIC DRILL FEATURES:

1-7/16" (36 mm) diameter x 2" (51 mm) depth of cut
Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds
Adjustable cutter guard with built-in chip breaker
Through spindle coolant system with removable reservoir
Maintenance free rail guide system for long life, minimal run-out and extreme accuracy
Safe Magnet™ circuitry recognizes magnetic holding power
Automatic slug ejection system
Magnet is 1/3 smaller, lighter and stronger than competing models
Magnet uses only 50% power when motor is not under load
Designed for easy field service and repair
All aluminum parts are heat treated for rigidity

Add to cart Details

Steelmax High Performance Cutting Fluid

PRICE $13.00 – $36.00

Steelmax® High Performance Cutting Fluid is a fully-synthetic, nitrite-free, water soluble cutting fluid engineered for use with both HSS and TCT annular cutters to improve cutting performance and extend cutter life. It can also be used for other grinding and cutting operations on grey iron castings, carbon steel, stainless steel, titanium and copper, brass and nickel alloys. Steelmax® High Performance Cutting Fluid concentrate is available in quart and gallon sizes with a recommended mix ratio of 8 parts water to 1 part concentrate.

100% biodegradable, water soluble concentrate
Produces outstanding tool life and cut finish
Superior cooling properties
No unpleasant odors; non-toxic and non-carcinogenic
Non-corrosive with excellent rust protection
Low foaming; easy clean-up

Select options Details

Steelmax HSS Annular Cutters

PRICE $37.20 – $265.40

Steelmax HSS ( High Speed Steel) annular cutters utilize an M2Al (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and a less brittle character compared to other M2 formulations, such as those using a cobalt additive. HSS annular cutters are most cost-effective for mild steel applications and holes up to 2-3/8" in diameter in material up to 2" thick. HSS annular cutters can be re-sharpened to extend cutter life. All Steelmax annular cutters ship with a pilot pin installed at no extra charge.* Steelmax High Performance Cutting Fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. Our High Performance Cutting Fluid is a water-based cutting fluid that is bio-degradable and does not require time-consuming cleanup prior to welding or assembling parts.

*6" HSS Cutters do not ship with pilot pin. Click here to purchase a one-or two-piece pilot pin with your 6" annular cutter order.

Select options Details

Steelmax TCT Annular Cutters

PRICE $79.20 – $495.30

Steelmax TCT annular cutters are made with the highest quality carbide available and are extremely well suited to work on harder materials and higher speed applications. TCT cutters are most cost effective for larger holes (over 1-1/2" in diameter) and in thicker materials (2" and over). All Steelmax annular cutters ship with a pilot pin installed at no extra charge.* Steelmax High-Performance Cutting Fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. Our High-Performance Cutting Fluid is a water-based cutting fluid that is bio-degradable and does not require time-consuming cleanup prior to welding or assembling parts.

*6" TCT Cutters do not ship with pilot pin. Click here to purchase a one-or two-piece pilot pin with your 6" annular cutter order.

Select options Details