This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE with Swivel Base The D400XTS magnetic drilling machine is suitable for numerous industrial hole making and tapping applications. The D400XTS has a swivel base which makes it much easier to align the pilot pin or twist drill for accurate drilling to avoid off-center holes, especially when used upside down or sideways. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4-3/4" (120 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse functions allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Innovative swivel base enables local movement of machine for precise hole positioning • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir- Out of stock
Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE The D400XT magnetic drilling machine is suitable for many industrial hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4" (100 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse function allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoirThis item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
- POWERFUL HEAVY DUTY MAGNETIC DRILLING MACHINE The D500XT magnetic drill is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 6" (152 mm) and drilling capacity up to 1-5/8" (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8" (M42) by using the quick change tapping system by Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Very powerful 2300 W motor • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
- The D1 AIR ATEX is an extremely small portable pneumatic drilling machine for cutting holes up to 1-3/8" (36 mm) diameter in hazardous environments and where access to the hole location is restricted. The D1 AIR ATEX conforms to the ATEX II 2 G/D c IIC T6/T4 standard for equipment used in hazardous environments. A combination of pneumatic drive and permanent magnetic base eliminate the need of an electric power supply, thus making this machine an ideal solution in many hazardous environments such as offshore oil platforms, mining applications, shipbuilding and petrochemical industries. The D1 AIR ATEX is one of the lowest height magnetic drills currently available on the world market. FEATURES
- 1-3/8" (35 mm) diameter x 1" (25 mm) depth of cut with annular cutters
- 5/8" (16 mm) diameter with solid twist drill bits
- For use in hazardous environments - fully ATEX compliant
- Low profile for use in height-restricted spaces
- Pneumatic drive and permanent magnetic base
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
