BITGONE PROGRAM
If your cutters are worn, used or even broken we have a deal for you. Bring your used, worn or broken cutters to select Linde locations and get $5 off a new Steelmax TCT or HSS annular cutter. These are the best annular cutters on the market and we now have them discounted for you.
STEELMAX ANNULAR CUTTERS
Steelmax offers a full line of high-quality High Speed Steel (HSS) and Tungsten Carbide Tipped (TCT) annular cutters for all of your hole-making needs. We stock a full range of both HSS and TCT cutters from 7/16” to 3″ in diameter and 1″, 2″ and 3″ depths of cut. Custom sizes are also available. All Steelmax annular cutters have standard Weldon shanks (3/4″ shank for cutter diameters up to 2-3/8″ and 1-1/4″ shank for cutter diameters above 2-3/8″). As a result, Steelmax cutters will fit and improve the performance of any mag drill!
All Steelmax cutters ship with a pilot pin installed at no extra charge.
HSS Cutters
Steelmax HSS cutters utilize an M2Al (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and its less brittle character compared to other M2 formulations, such as those using a cobalt additive. HSS cutters are most cost effective for mild steel applications and holes up to 2-3/8″ in diameter in material up to 2″ thick and can be re-sharpened to extend cutter life.
TCT Cutters
Steelmax TCT cutters are made with the highest quality carbide available and are extremely well suited to work on harder materials and higher speed applications. TCT cutters are most cost-effective for larger holes (over 1-1/2″ in diameter) and in thicker materials (2″ and over).
