Este artículo se envía por flete. Llega en palé y solo se puede enviar a una dirección comercial. Comuníquese con nosotros para conocer los accesorios de roscado disponibles con este taladro.
-
Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE with Swivel Base The D400XTS magnetic drilling machine is suitable for numerous industrial hole making and tapping applications. The D400XTS has a swivel base which makes it much easier to align the pilot pin or twist drill for accurate drilling to avoid off-center holes, especially when used upside down or sideways. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4-3/4" (120 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse functions allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Innovative swivel base enables local movement of machine for precise hole positioning • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir -
El D1 AIR ATEX es una máquina perforadora neumática portátil extremadamente pequeña para cortar orificios de hasta 1-3 / 8 "(36 mm) de diámetro en entornos peligrosos y donde el acceso a la ubicación del orificio está restringido. El D1 AIR ATEX cumple con ATEX II 2 G / D c IIC T6 / T4 estándar para equipos utilizados en entornos peligrosos. Una combinación de accionamiento neumático y base magnética permanente elimina la necesidad de una fuente de alimentación eléctrica, lo que convierte a esta máquina en una solución ideal en muchos entornos peligrosos como el petróleo en alta mar plataformas, aplicaciones mineras, industrias de construcción naval y petroquímica El D1 AIR ATEX es uno de los taladros magnéticos de menor altura disponibles actualmente en el mercado mundial.- 1-3 / 8 "(35 mm) de diámetro x 1" (25 mm) de profundidad de corte con cortadores anulares
- 5/8 "(16 mm) de diámetro con brocas helicoidales sólidas
- Para uso en entornos peligrosos, totalmente compatible con ATEX
- Perfil bajo para uso en espacios con altura restringida
- Accionamiento neumático y base magnética permanente
Este artículo se envía por flete. Llega en palé y solo se puede enviar a una dirección comercial. Comuníquese con nosotros para conocer los accesorios de roscado disponibles con este taladro.
-
Out of stock
VARIABLE SPEED MAGNETIC DRILLING & TAPPING MACHINE The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4" (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1"( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • 1600 W motor • Overload & Overheat protection • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoirEste artículo se envía por flete. Llega en palé y solo se puede enviar a una dirección comercial. Comuníquese con nosotros para conocer los accesorios de roscado disponibles con este taladro.
-
The Steelmax D1 PRO X is an extremely durable, rigorously constructed magnetic drilling machine that is purposely designed for longevity. The 440 RPM motor (under load) makes it optimal to use with HSS and TCT annular cutters. Lightweight, compact and portable, this magnetic drill features a powerful 1100-watt motor capable of drilling with annular cutters up to 1-9/16" (40 mm) diameter holes through 2" (50 mm) thick material. The optional drill chuck can be used with solid, twist drills up to 5/8" (16 mm) diameter and the large stroke enables easy use of longer cutters. Drill body is updated with increased stiffness along with gearbox housing and ribs. The D1 PRO X is equipped with the most advanced electromagnetic technology. Using only 50% power when the motor is not under load, the Energy Saving Base (ESB) reduces excessive heat build-up and dramatically increases the operating life of the electromagnet. Our Magnetic Field Shape Control (MFSC) system provides maximum holding power on thin materials. The integrated Magnetic Power Adhesion Control Module (MPAC) detects the adhesive force of the electromagnetic base and prevents drill activation when there is insufficient adhesive power, protecting both the machine and the operator. FEATURES- Hasta 1-9 / 16 "de diámetro y 2" de profundidad de corte
- 6" stroke
- Control de adhesión de potencia magnética (MPAC)
- Control de forma de campo magnético (MFSC)
- Base de ahorro de energía (ESB)
- Comes with swarf shield and coolant bottle assembly
- Unrivaled cutting capacity weight class
-
POWERFUL HEAVY DUTY MAGNETIC DRILLING MACHINE The D500XT magnetic drill is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 6" (152 mm) and drilling capacity up to 1-5/8" (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8" (M42) by using the quick change tapping system by Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Very powerful 2300 W motor • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoirEste artículo se envía por flete. Llega en palé y solo se puede enviar a una dirección comercial. Comuníquese con nosotros para conocer los accesorios de roscado disponibles con este taladro.
-
Out of stock
Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE The D400XT magnetic drilling machine is suitable for many industrial hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4" (100 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse function allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoirEste artículo se envía por flete. Llega en palé y solo se puede enviar a una dirección comercial. Comuníquese con nosotros para conocer los accesorios de roscado disponibles con este taladro.
-
La D1 Auto de Steelmax es una máquina perforadora semiautomática avanzada que es la solución ideal para perforar de manera eficiente una gran cantidad de orificios en placas, vigas y otras aplicaciones de fabricación de acero. Con un diámetro máximo de 1-3 / 8 ”y una profundidad de corte de 2”, la D1 Auto cubre una amplia gama de necesidades de perforación en una máquina compacta y liviana CARACTERÍSTICAS- 1-3 / 8 "(36 mm) de diámetro x 2" (51 mm) de profundidad de corte
- Diseño compacto y rígido que pesa solo 30 libras. (13,5 kg)
- La combinación óptima de velocidad y par del husillo produce tiempos de ciclo líderes en la industria con cortadores TCT y HSS
- Sistemas de control de imanes seguros para un excelente rendimiento y seguridad del operador
- El sistema de guía de doble carril proporciona una rigidez extraordinaria y un funcionamiento sin mantenimiento
- La base magnética de alta eficiencia proporciona un poder de sujeción superior en una placa tan delgada como 1/4 ”(6 mm)
- Protector de cortador integrado y depósito de refrigerante de gran capacidad
-
ANNULAR CUTTER DRILLING MACHINE The D250X magnetic drill has a powerful 1600w motor which enables a cutting capacity up to 2-3/8" and a depth of cut up to 3". Newly designed motor housing and magnet make this large capacity drill lighter than other competitive drills in the market. The maintenance free guide rail system helps reduce cutter breakage and gives optimal cutter life. Optimized drilling speeds for both HSS and TCT annular cutters. FEATURES • 1600 W powerful motor with heavy duty 2-speed gearbox • Maintenance free rail guide system using dual guide bars • Suitable for use with TCT or HSS cutters • Rigid design extends tool life • Drilling with twist drills featuring Weldon shank • Innovative smart magnet with weight reduction • Swarf shield/Cutter guard • Coolant bottle assembly -
Another cutting-edge D1 variant, the D1-TS para acero fino features an innovative magnet design that allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all.D1 Thin Steel MAGNETIC DRILL FEATURES:
- 1-3 / 8 "(36 mm) de diámetro x 2" (51 mm) de profundidad de corte
- Ultra compacto y ligero: altura de trabajo de 14-3 / 4 "(con botella de refrigerante) y solo 22 libras
- Protector de cortador ajustable con rompevirutas incorporado
- Sistema de refrigeración a través del husillo con depósito extraíble
- Sistema de guía de riel sin mantenimiento para una vida útil prolongada, una excentricidad mínima y una precisión extrema
- Newly designed magent coil for holding on thin material (1/8")
- Sistema automático de expulsión de babosas
- Diseñado para un fácil servicio y reparación en campo
- Todas las piezas de aluminio se tratan térmicamente para mayor rigidez.
-
The D1 Low Profile is an ultra-low profile mag drill, that fits in the tightest of work spaces. It is a perfect solution for any applications in confined spaces, where typical mag drills are too large. A powerful motor and strong, electromagnetic base enable drilling of holes up to 1-7/16" (36 mm) diameter to a depth of up to 1-3/16" (30 mm). The D1 Low Profile Mag Drill accepts both TCT and HSS cutters as well as twist drill bits with a standard 3/4” Weldon shank. FEATURES- Taladro magnético de perfil ultrabajo - sólo 7 "de alto - con base electromagnética
- Peso extremadamente bajo: solo 21 libras (9,5 kg)
- 1-7 / 16 "(36 mm) de diámetro x 1-3 / 16" (30 mm) de profundidad de corte con cortadores anulares
- Acepta brocas helicoidales Weldon Shank de hasta 1/2 "de diámetro
- Más de 1-1 / 2 "de carrera (39 mm)
- Protector de virutas integrado
- Mango de elevación conveniente para un fácil transporte
-
Tap Size Annular Cutters with Pilot Pin Installed Experience precision and efficiency with our comprehensive range of HSS Tap Size Annular Cutters. Engineered for excellence, these cutters are designed to provide clean and accurate holes in a variety of materials, ensuring seamless threading and tapping operations. With a wide selection of sizes and superior cutting performance, our Tap Size Annular Cutters are your go-to solution for achieving impeccable results in metalworking and construction projects. Elevate your productivity and precision with our top-tier tools, engineered to meet the highest industry standards. -
Pilot Pins for Annular Cutters are crucial components in the drilling process, particularly in metalworking and heavy-duty applications. They serve as guides and alignment device for the annular cutter or magnetic drill, ensuring the most precise and accurate hole drilling.