Este artículo se envía por flete. Llega en palé y solo se puede enviar a una dirección comercial. Comuníquese con nosotros para conocer los accesorios de roscado disponibles con este taladro.
-
Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE with Swivel Base The D400XTS magnetic drilling machine is suitable for numerous industrial hole making and tapping applications. The D400XTS has a swivel base which makes it much easier to align the pilot pin or twist drill for accurate drilling to avoid off-center holes, especially when used upside down or sideways. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4-3/4" (120 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse functions allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Innovative swivel base enables local movement of machine for precise hole positioning • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir -
POWERFUL HEAVY DUTY MAGNETIC DRILLING MACHINE The D500XT magnetic drill is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 6" (152 mm) and drilling capacity up to 1-5/8" (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8" (M42) by using the quick change tapping system by Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Very powerful 2300 W motor • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoirEste artículo se envía por flete. Llega en palé y solo se puede enviar a una dirección comercial. Comuníquese con nosotros para conocer los accesorios de roscado disponibles con este taladro.
-
El D1 AIR ATEX es una máquina perforadora neumática portátil extremadamente pequeña para cortar orificios de hasta 1-3 / 8 "(36 mm) de diámetro en entornos peligrosos y donde el acceso a la ubicación del orificio está restringido. El D1 AIR ATEX cumple con ATEX II 2 G / D c IIC T6 / T4 estándar para equipos utilizados en entornos peligrosos. Una combinación de accionamiento neumático y base magnética permanente elimina la necesidad de una fuente de alimentación eléctrica, lo que convierte a esta máquina en una solución ideal en muchos entornos peligrosos como el petróleo en alta mar plataformas, aplicaciones mineras, industrias de construcción naval y petroquímica El D1 AIR ATEX es uno de los taladros magnéticos de menor altura disponibles actualmente en el mercado mundial.- 1-3 / 8 "(35 mm) de diámetro x 1" (25 mm) de profundidad de corte con cortadores anulares
- 5/8 "(16 mm) de diámetro con brocas helicoidales sólidas
- Para uso en entornos peligrosos, totalmente compatible con ATEX
- Perfil bajo para uso en espacios con altura restringida
- Accionamiento neumático y base magnética permanente
Este artículo se envía por flete. Llega en palé y solo se puede enviar a una dirección comercial. Comuníquese con nosotros para conocer los accesorios de roscado disponibles con este taladro.