• D1 Thin Steel Magnetic Drilling Machine
    Another cutting-edge D1 variant, the D1-TS para acero fino features an innovative magnet design that allows for optimal magnetic field distribution on very thin steel plates with comparable holding force to drills with standard magnets. This allows the drill to safely work on material down to 1/8” (3mm) where most other drills would be deemed unsafe or not work at all.

    D1 Thin Steel MAGNETIC DRILL FEATURES:

    • 1-3 / 8 "(36 mm) de diámetro x 2" (51 mm) de profundidad de corte
    • Ultra compacto y ligero: altura de trabajo de 14-3 / 4 "(con botella de refrigerante) y solo 22 libras
    • Protector de cortador ajustable con rompevirutas incorporado
    • Sistema de refrigeración a través del husillo con depósito extraíble
    • Sistema de guía de riel sin mantenimiento para una vida útil prolongada, una excentricidad mínima y una precisión extrema
    • Newly designed magent coil for holding on thin material (1/8")
    • Sistema automático de expulsión de babosas
    • Diseñado para un fácil servicio y reparación en campo
    • Todas las piezas de aluminio se tratan térmicamente para mayor rigidez.
    Añadir al carrito Detalles
  • D1 LP Low Profile Electric Mag Drill D1 LP Low Profile Electric Mag Drill
    The D1 Low Profile is an ultra-low profile mag drill, that fits in the tightest of work spaces. It is a perfect solution for any applications in confined spaces, where typical mag drills are too large. A powerful motor and strong, electromagnetic base enable drilling of holes up to 1-7/16" (36 mm) diameter to a depth of up to 1-3/16" (30 mm). The D1 Low Profile Mag Drill accepts both TCT and HSS cutters as well as twist drill bits with a standard 3/4” Weldon shank. FEATURES
    • Taladro magnético de perfil ultrabajo - sólo 7 "de alto - con base electromagnética
    • Peso extremadamente bajo: solo 21 libras (9,5 kg)
    • 1-7 / 16 "(36 mm) de diámetro x 1-3 / 16" (30 mm) de profundidad de corte con cortadores anulares
    • Acepta brocas helicoidales Weldon Shank de hasta 1/2 "de diámetro
    • Más de 1-1 / 2 "de carrera (39 mm)
    • Protector de virutas integrado
    • Mango de elevación conveniente para un fácil transporte
    Añadir al carrito Detalles
  • The D1 is an ultra-compact magnetic drilli with maximum capacity of 1-3/8" (36 mm) diameter in 2" (51 mm) thick material. The unit's ultra light weight of 22 lbs (10 kg) is the lowest in its class.  The maintenance-free rail guide system minimizes run-out, maintains accuracy and reduces cutter breakage. The D1 is equipped with an electromagnetic Energy Saving Base (ESB) which uses only 50% of the power when the motor is not under load, dramatically increasing the operating life of the electromagnet, and a Magnetic Field Shape Control (MFSC) system which provides maximum holding power on thin material.  Safe Magnet™ circuitry assures adequate adhesive force for safe operation.

    TALADRO MAGNÉTICO PORTÁTIL COMPACTO D1 CARACTERÍSTICAS:

    • 1-3 / 8 "(36 mm) de diámetro x 2" (51 mm) de profundidad de corte
    • Ultra compacto y ligero: altura de trabajo de 14-3 / 4 "(con botella de refrigerante) y solo 22 libras
    • Protector de cortador ajustable con rompevirutas incorporado
    • Sistema de refrigeración a través del husillo con depósito extraíble
    • Sistema de guía de riel sin mantenimiento para una vida útil prolongada, una excentricidad mínima y una precisión extrema
    • El circuito Safe Magnet ™ reconoce el poder de sujeción magnético
    • Sistema automático de expulsión de babosas
    • El imán es 1/3 más pequeño, más ligero y más fuerte que los modelos de la competencia
    • El imán usa solo energía 50% cuando el motor no está bajo carga
    • Diseñado para un fácil servicio y reparación en campo
    • Todas las piezas de aluminio se tratan térmicamente para mayor rigidez.
    Añadir al carrito Detalles
Ve arriba