Le Perceuse à aimant pivotant D1-SM possède toutes les caractéristiques qui font de la D1 la perceuse préférée des fabricants, avec en plus la possibilité de percer facilement des trous sur des surfaces convexes (diamètre minimum de 12”) et concaves (diamètre minimum de 40”). Quatre aimants individuels pivotants s'adaptent à la surface, ce qui permet à la machine de travailler sur des surfaces irrégulières. Chaque aimant est équipé d'une force de maintien variable qui facilite le positionnement de la machine lorsque les aimants sont partiellement engagés. Les aimants fonctionnent sans électricité, ce qui constitue une excellente solution de sécurité pour vos besoins de forage.
Caractéristiques techniques de la foreuse magnétique portable compacte D1
| Vitesses du moteur (sous charge) : | 350 tr/min |
| Puissance du moteur | 920 W 1,2 HP |
| Tension | 115V/60Hz ou 230V/50Hz |
| Taille maximale du trou - Fraise annulaire | 1-7/16 " (36 mm) |
| Capacité de perçage Max/Twist | 1/2" (12 mm) |
| Profondeur de coupe maximale | 2" (51 mm) |
| Accident vasculaire cérébral | 2-3/4" (70 mm) |
| Force de serrage magnétique (surface d'une épaisseur de 25 mm et d'une rugosité de 1,25 %) | 2 021,64 (lbf) 917 kgf (9000 N) |
| Dimensions de la base magnétique | 3-1/8 x 6-5/16 x 1-7/16 [“] 80 × 161 × 36,5(mm) |
| Épaisseur min. Épaisseur du lieu de travail | 1/4" (6 mm) |
| Broche | 3/4" (19 mm) Weldon |
| Porte-outils | 3/4" (19 mm) Weldon |
| Poids | 22 lbs (10 kg) |
Information complémentaire
| Poids | 34 livres |
|---|---|
| Dimensions | 19 × 15 × 7 pouce |
Application Use Cases
The S14-M suits mechanical fabrication, transportation, and construction work where angled cuts matter as much as a clean edge. It handles pipe, plate, channel, conduit, angle iron, metal studs, rebar, and tubing, making it useful for structural steel fabrication, custom metal frames, and repeatable angle cuts on production runs. Its 1750W motor and portable 72 lb frame support both jobsite work and continuous shop use.
Frequently Asked Questions
What's the difference between the S14 and S14-M?
The S14-M offers a wider +/-46° mitering range compared to the S14's 45°, plus a heavier cast-aluminum base for added stability. Both share the same 1750W motor, 14" blade, and pipe capacity, with the S14-M priced for its extra versatility.
Is 230V available, or only 120V?
The S14-M comes in both 120V/60Hz (SM-S-14-M) and 230V/50Hz (SM-S-14-M-230) versions, so it runs on standard shop power or 230V circuits depending on your facility's setup.
What blade comes included, and can it be swapped?
A newly designed 14" laser-cut TCT blade for mild steel is included. The 1" arbor bore accepts other compatible 14" blades, so operators can swap in one suited to aluminum, stainless, or thinner materials.
What's the mitering range and how is it adjusted?
The S14-M miters up to +/-46°, letting operators dial in custom angles for fabrication layouts. The precision miter table locks at the set angle, delivering repeatable, accurate cuts across a production run.
Is it suitable for field/job site use or shop-only?
At 72 lbs, the S14-M is portable enough for jobsite use while still built for shop duty. Steelmax positions it for both field and shop environments, making it a flexible pick either way.
