- Disponible avec une capacité de levage de 550lbs, 1100lbs, 2200lbs, 4400lbs (250kg, 500kg, 1000kg, 2000 kg).
- Aimant permanent autonome
- Aucune alimentation électrique n'est nécessaire
- Facteur de sécurité pour une capacité de poids importante
- Le bloc de sécurité autobloquant empêche toute désactivation accidentelle
- La conception intelligente de l'aimant n'active l'aimant que lorsque la force d'adhérence est suffisante.
- Bloc mono, conception nickelée antirouille
- Sans entretien
Steelmax Max Lifter magnets are compact, self-contained lifting magnets that use permanent magnets to maintain holding power indefinitely. Because they require no electric power, they can be used where electric power is not readily available and are free of the restriction of power cords.
MANUTENTION DE MATÉRIAUX PLATS OU RONDS The Steelmax lifting magnets (Max Lifter series) are compact, self-contained lifting magnets using permanent magnets to maintain holding power indefinitely. Because they require no electric power, they can be used where electric power is not readily available and free of the restriction of power cords. Max Lifter magnets are safe and efficient. The magnets lift, transport and release the load rapidly with the simple motion of a lever in a single operation. Once activated, a spring-loaded device blocks the engagement lever preventing any accidental deactivation. Each Max Lifter magnet is tested at three times the recommended load. Max Lifter magnets are robust and reliable. The rotor, the only moving part, has its fulcrum on ball bearings and doesn’t make any physical contact during rotation. All steel parts are nickel coated to prevent rust formation and improve component life. Max Lifter magnets will operate “maintenance free” over long periods of time. FEATURES- MANUTENTION DE MATÉRIAUX PLATS OU RONDS The Steelmax Max Lifter TG series is the ideal solution for handling thin steel on any job site. The Max Lifter TG has been meticulously designed to handle the needs inherent in working with thin steel. Our engineers have created a special design of the polar surface that when coupled with a delicate balancing of magnetic weight in the stator and rotor creates concentrated magnetic flux in a closer distance. This means more magnetic force in a much smaller area and more strength for handling thin steel. Like the standard Max Lifter line the magnets are safe and efficient and require no electricity. The magnets lift, transport and release the load rapidly with the simple motion of a lever using a single operator. Once activated, a spring-loaded device blocks the maneuvering lever preventing any accidental deactivation. The Max Lfiter TG maintains uniform magnetic strength over the entire contact area. Max Lifter TG magnets will operate “maintenance free” over long periods of time. FEATURES
- Available in 2 Models 330, 660 lbs (150, 300, kg) lifting capacity• High power rare earth magnets• No electrical power required• Special treatment on all surfaces for corrosion & wear protection• Intelligent magnet design activates magnet only when there is sufficient holding power• Mono block, rust-proof nickel-coated design• Maintenance free
FR 
EN 
ES 
PT