Une autre variante de la D1 à la pointe de la technologie, la D1-TS pour l'acier mince est doté d'un aimant de conception innovante qui permet une distribution optimale du champ magnétique sur des plaques d'acier très fines avec une force de maintien comparable à celle des perceuses équipées d'aimants standard. Cela permet à la perceuse de travailler en toute sécurité sur des matériaux d'une épaisseur inférieure à 3 mm, là où la plupart des autres perceuses seraient jugées dangereuses ou ne fonctionneraient pas du tout.
D1 Acier fin CARACTÉRISTIQUES DU PERCEUR MAGNÉTIQUE :
1-7/16” (36 mm) diameter x 2" (51 mm) depth of cut
Ultra compact and light weight: 14-3/4" working height (with coolant bottle) and only 22 pounds
Protecteur de coupe réglable avec brise-copeaux intégré
Système de refroidissement de la broche avec réservoir amovible
Système de guidage du rail sans entretien pour une longue durée de vie, un faux-rond minimal et une extrême précision
Newly designed magent coil for holding on thin material (1/8")
Système d'éjection automatique des balles
Conçu pour faciliter l'entretien et la réparation sur le terrain
Toutes les pièces en aluminium sont traitées thermiquement pour assurer leur rigidité
Le Overhead Support is highly recommended for the HP110 punch head. This incredible tool allows the operator to move the punch head with little or no effort. Additionally, it allows easy manipulation of the punch and power pack as a single unit. The overhead support is designed for single-operator use and therefore increases productivity by saving manpower and time. Part Number-SM-ZUR-0517-15-00-00-0 Le Free Standing Base is fantastic for small production runs and includes foot pedal controls for ease of operator use and bench operation. The base allows the transformation of the HP110/HP60 to a table top unit. Part Number SM-ZST-0507-91-00-00-0 Le Wheeled Carriage for punch has 6 points of contact that permit smooth and efficient lineal movement along the workpiece. This great addition to our Hydraulic Punch lineup is designed for single operators and makes one hand operation a breeze. Part Number-SM-PRW-0507-90-00-00-0
Steelmax offers a full line of the highest quality hydraulic punches and dies for use with its best-in-class HP60 et HP110 double action portable hydraulic punching systems. Round punches and dies for flat plate, as well as angled dies for punching round holes in beam flanges, are available as stock items for both punching systems. Selected slot sizes are also stock items. Special shapes and additional slot sizes are available by special order with very short lead times.
The D1 Auto from Steelmax is an advanced semi-automatic drilling machine that is the ideal solution for efficiently drilling large numbers of holes in plates, girders, and other steel fabrication applications. With a maximum 1-3/8” diameter and 2” depth of cut, the D1 Auto covers a wide range of drilling needs in a compact, lightweight machine FEATURES
1-3/8" (36 mm) diameter x 2" (51 mm) depth of cut
Compact, rigid design that weighs just 30 lbs. (13.5 kg)
Optimal combination of spindle speeds and torque produces industry leading cycle times with TCT and HSS cutters
Safe magnet control systems for excellent performance and operator safety
Dual rail guide system provides extraordinary stiffness and maintenance free operation
High efficiency magnetic base provides superior holding power on plate as thin as 1/4” (6mm)
Integrated cutter guard and large coolant tank capacity
The D200XT drilling machine is suitable for hole cutting and tapping applications. Powerful 1600 W variable speed motor enables annular cutting capacity up to 2” (50mm) and drilling capacity up to 7/8”(23mm). Forward & reverse functions allow tapping up to 3/4" with Steelmax’s new tapping chuck and collet system. Two speed gearbox with continuous speed adjustment allows setting the optimal speed depending on diameter, steel grade or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. FEATURES • 1600 W powerful motor with heavy-duty 2-speed gearbox • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes • Suitable for use with TCT or HSS cutters • Electronic clutch and speed control • Overload & Overheat protection • Rigid design extends tool life • Tilt sensor stops motor in case of machine break away • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
Please contact us for tapping accessories available with this drill.
ANNULAR CUTTER DRILLING MACHINE The D250X magnetic drill has a powerful 1600w motor which enables a cutting capacity up to 2-3/8" and a depth of cut up to 3". Newly designed motor housing and magnet make this large capacity drill lighter than other competitive drills in the market. The maintenance free guide rail system helps reduce cutter breakage and gives optimal cutter life. Optimized drilling speeds for both HSS and TCT annular cutters. FEATURES • 1600 W powerful motor with heavy duty 2-speed gearbox • Maintenance free rail guide system using dual guide bars • Suitable for use with TCT or HSS cutters • Rigid design extends tool life • Drilling with twist drills featuring Weldon shank • Innovative smart magnet with weight reduction • Swarf shield/Cutter guard • Coolant bottle assembly
VARIABLE SPEED MAGNETIC DRILLING & TAPPING MACHINE The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4" (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1"( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • 1600 W motor • Overload & Overheat protection • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
Multi-Purpose HEAVY DUTY MAGNETIC DRILLING MACHINE The D400XT magnetic drilling machine is suitable for many industrial hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 4" (100 mm) and drilling capacity up to 1-1/4" (31.75 mm). Forward and reverse function allows tapping of pre-drilled holes up to 1-1/4" (M30) by using the quick-change tapping system from Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on size of diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. Innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Most powerful motor in its class (among MT3 drills) • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small through large diameters • Full electronic motor control • Electronic clutch and speed control • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
POWERFUL HEAVY DUTY MAGNETIC DRILLING MACHINE The D500XT magnetic drill is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 6" (152 mm) and drilling capacity up to 1-5/8" (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8" (M42) by using the quick change tapping system by Steelmax. 4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety. FEATURES • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes • Very powerful 2300 W motor • Overload & Overheat protection • 4-Speed gear with continuous speed adjustment • Intelligent speed control system maintains stable speed regardless of load changes • Tapping of through and blind holes with intelligent load control • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters • Full electronic motor control • Electronic clutch (faster than mechanical) • Rigid design extends tool life • Tilt sensor (gyroscopic) stops motor in case of machine break away • Innovative smart magnet with reduced weight • Intuitive control panel at top of the drill • Large coolant reservoir
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
The D1 AIR ATEX is an extremely small portable pneumatic drilling machine for cutting holes up to 1-3/8" (36 mm) diameter in hazardous environments and where access to the hole location is restricted. The D1 AIR ATEX conforms to the ATEX II 2 G/D c IIC T6/T4 standard for equipment used in hazardous environments. A combination of pneumatic drive and permanent magnetic base eliminate the need of an electric power supply, thus making this machine an ideal solution in many hazardous environments such as offshore oil platforms, mining applications, shipbuilding and petrochemical industries. The D1 AIR ATEX is one of the lowest height magnetic drills currently available on the world market. FEATURES
1-3/8" (35 mm) diameter x 1" (25 mm) depth of cut with annular cutters
5/8" (16 mm) diameter with solid twist drill bits
For use in hazardous environments - fully ATEX compliant
Low profile for use in height-restricted spaces
Pneumatic drive and permanent magnetic base
This item ships via freight. It arrives on a pallet and can only be shipped to a commercial address. Please contact us for tapping accessories available with this drill.
Available in two models with 35(HP60) ton and 47(HP110) ton capacities. Steelmax Portable Hydraulic Punches are ideal solutions to speed the production of holes and slots in beam flanges, angle, channel, plates and bar stock. This steel hole punch features a Double Action design that minimizes cycle times and, coupled with high portability, promotes reduced material handling generating highly efficient hole production compared to other processes. CARACTÉRISTIQUES
Maximum Hole Diameter 1-1/16" (27 mm)
Double Action Design Prevents Punch Binding and Speeds Retraction
Intelligent Control System with Automatic Load Detection and Mode Indicator Light
Rugged Forged Steel “C” Frame for Strength and Durability
Fully Portable Punch and Pump Package Reduces Material Handling
Optional Free Standing Base with Foot Pedal permits Bench Top Operation
PRIX $81.60 – $510.20Plage de prix : $81.60 à $510.20
Steelmax TCT annular cutters are made with the highest quality carbide available and are extremely well suited to work on harder materials and higher speed applications. TCT cutters are most cost effective for larger holes (over 1-1/2" in diameter) and in thicker materials (2" and over). All Steelmax annular cutters ship with a pilot pin installed at no extra charge.* Steelmax High-Performance Cutting Fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. Our High-Performance Cutting Fluid is a water-based cutting fluid that is bio-degradable and does not require time-consuming cleanup prior to welding or assembling parts.
*6" TCT Cutters do not ship with pilot pin. Cliquez ici pour acheter a one-or two-piece pilot pin with your 6" annular cutter order.
Choix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit Détails
Le Overhead Support is highly recommended for the HP110 punch head. This incredible tool allows the operator to move the punch head with little or no effort. Additionally, it allows easy manipulation of the punch and power pack as a single unit. The overhead support is designed for single-operator use and therefore increases productivity by saving manpower and time. Part Number-SM-ZUR-0517-15-00-00-0 
Le Free Standing Base is fantastic for small production runs and includes foot pedal controls for ease of operator use and bench operation. The base allows the transformation of the HP110/HP60 to a table top unit. Part Number SM-ZST-0507-91-00-00-0 
Le Wheeled Carriage for punch has 6 points of contact that permit smooth and efficient lineal movement along the workpiece. This great addition to our Hydraulic Punch lineup is designed for single operators and makes one hand operation a breeze. Part Number-SM-PRW-0507-90-00-00-0 
FR 
EN 
ES 
PT