Have A Promotional Code?
Puede que estés interesado en…
-
Steelmax® High Performance Cutting Fluid is a fully-synthetic, nitrite-free, water soluble cutting fluid engineered for use with both HSS and TCT annular cutters to improve cutting performance and extend cutter life. It can also be used for other grinding and cutting operations on grey iron castings, carbon steel, stainless steel, titanium and copper, brass and nickel alloys. Steelmax® High Performance Cutting Fluid concentrate is available in quart and gallon sizes with a recommended mix ratio of 8 parts water to 1 part concentrate.- 100% biodegradable, water soluble concentrate
- Produces outstanding tool life and cut finish
- Superior cooling properties
- No unpleasant odors; non-toxic and non-carcinogenic
- Non-corrosive with excellent rust protection
- Low foaming; easy clean-up
-
Steelmax HSS ( High Speed Steel) annular cutters utilize an M2Al (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and a less brittle character compared to other M2 formulations, such as those using a cobalt additive. HSS annular cutters are most cost-effective for mild steel applications and holes up to 2-3/8" in diameter in material up to 2" thick. HSS annular cutters can be re-sharpened to extend cutter life. All Steelmax annular cutters ship with a pilot pin installed at no extra charge.* Steelmax High Performance Cutting Fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. Our High Performance Cutting Fluid is a water-based cutting fluid that is bio-degradable and does not require time-consuming cleanup prior to welding or assembling parts.*6" HSS Cutters do not ship with pilot pin. Click here to purchase a one-or two-piece pilot pin with your 6" annular cutter order.
-
Steelmax TCT annular cutters are made with the highest quality carbide available and are extremely well suited to work on harder materials and higher speed applications. TCT cutters are most cost effective for larger holes (over 1-1/2" in diameter) and in thicker materials (2" and over). All Steelmax annular cutters ship with a pilot pin installed at no extra charge.* Steelmax High-Performance Cutting Fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. Our High-Performance Cutting Fluid is a water-based cutting fluid that is bio-degradable and does not require time-consuming cleanup prior to welding or assembling parts.*6" TCT Cutters do not ship with pilot pin. Click here to purchase a one-or two-piece pilot pin with your 6" annular cutter order.
Totales del carrito
| Subtotal | $2,005.00 |
|---|---|
| Envío | Introduce tu dirección para ver las opciones de envío. |
| Impuesto | Taxes will be calculated at checkout |
| Total | $2,005.00 |